View C016-00U000-020-1_666371.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

circular connectors amphenol amphenol-tuchel electronics gmbh | mate by amphenol e a s i e r a n d q u i c k e r t o a s s e m b l e
2 amphenol general information we reserve the right to change the design due to improvement in quality, development or production requirements. this catalogue must not be used in any form or manner without our prior approval in writing (copyright law, fair trading law, civil code). this release replaces all former releases. is a registered trademark. usage or modification is not allowed without written permission of amphenol-tuchel. quality from the beginning of the development process, amphenol-tuchel electronics gmbh gives quality considerations the top priority. meeting customer requirements is the main focus of the product development process. interdisciplinary project teams with diverse backgrounds from marketing, product engineering and production guarantee the development and production of robust and reliable connector solutions. our quality assessment begins with the initial contact to the customer and extends through the life of the product. a satisfied customer is the measure of our success. we strive to use environmentally friendly processes that minimize the waste of natural resources and introduction of toxins into the environment. certif cations: ts 16949 iso 14001 iso 9000:2000 the company amphenol-tuchel electronics gmbh is a member of the usa based amphenol corporation. with our own global presence we offer our customers exceptional technical support and worldwide service in the areas of development, production and distribution. amphenol-tuchel electronics gmbh has a successful history as a partner to our customers and sets standards for connector technology. eco | mate
amphenol 3 accessories 11 crimp contacts 10 derating curves / order information 5 products 6 technical data 600v - version 8 products 600v - version 9 technical data 5 product description 4 general information 2 content eco | mate m page ? new cable screw connection with clamping ring ? strain relief and mounted gasket all in one component ? ergonomically shaped handle for a better grip and safer handling ? fastening for the protective caps on the receptacle housing ? one cable housing for all cable diameters (6 mm - 12,5 mm) remarks / safety classification 16 technical information 13 mounting instructions 12 ? new cable screw connection with clamping ring ? new cable screw connection with summary of part numbers 17
4 amphenol product description product description advantages: ? quick and easy assembly ? screwed cable gland with clamping ring ? strain relief and mounted gasket all in one component ? cable housing, straight or angled, for the cable diameter 6 - 12,5 mm ? robust thread for the screwed cable gland ? ergonomically designed product range for safe handling ? pre-loaded ground contact ? fastening for the protective caps on the housing of the receptacles ? the program is compatible with the c16-1 se ries additional standards: ? the 6+pe model corresponds to din 9684-1 interface to the signal transmission on inside cabin applications for agricultural machines and tractors testhouse characteristics in design and conception the program meets the high requirements for applications in industrial technology. easy operation, reduced dimensions and a more robust design are only a few of the features of the series. the connectors main area of application is in the fields of plant construction and machine building . the connector is used for measuring and controlling applications as well as for power supply. technology. the series is comprised of a large selection of housings and shapes and offers models with screw, solder and crimp termination. features: ? circular connectors with 3+pe and 6+pe contacts ? housing components made from premium molding material ? cable housing straight or angled ? protection class ip 65/67 in mated condition in accordance wi th din en 60526 ? clamping ring or internal strain relief in general approvals refer to versions of the connector series. test report upon request. 1) please refer to ?conditions of acceptability 3+pe, 400 v, 16 a 6+pe, 250 v, 10 a (solderversion) 6+pe, 250 v, 13 a (crimpversion) 3+pe, 400 v, 16 a 6+pe, 250 v, 10 a (solderversion) 6+pe, 250 v, 13 a (crimpversion) 3+pe, 400v, 16a 6+pe, 250v, 13a 3+pe, 250 v, 12 a 6+pe, 250 v, 8 a vde sev ul 1) csa
amphenol 5 3 + pe 6 + pe 400 v 250 v 250 v 3 3 iii iii ii ii 6000 v 4000 v 16 a / + 55 c 13 a / + 55 c 12 a/ + 55 c 10 8 10 8 5 m 5 m 40 / 125 / 56 40 / 100 / 56 ip 65 / ip 67 pa 6.6 / pa 6 pa 6.6 / pa 6 max. 0,75 mm 2 awg 18 0,14 - 1,5 mm 2 awg 26 - 16 0,75 - 2,5 mm 2 awg 18-14 neopren vo ul 94 15 n 30 n -40c ... +100c din en 60664-1 1) din en 60664-1 1) din en 60664-1 1) din en 60664-1 1) din en 60664-1 1) din en 60512-5-2, test 5b din en 60512-3-1, test 3a din en 60512, test 2a din en 60068-1 din en 60529 din en 60512-13-2, test 13b din en 60512, test 9a -40c ... +125c tpe characteristics general characteristics number of contacts solder type screw type crimp type 500 mating cycles silver plated / gold plated screw solder crimp round thread electrical characteristics rated voltage pollution degree installation (overvoltage) category material group rated impulse withstand voltage current carrying capacity insulation resistance contact resistance climatic characteristics climatic category operating temperature mechanical characteristics degree of protection insertion and withdrawal force mechanical operation materials housing material dielectric material gasket material material lace for protective cap contact plating other characteristics termination technique wire gauge / awg flammability locking system the stated technical values refer to the use as connector without breaking capacity (coc) . if these components are used as plug and socket device a reduced current carrying capacity has to be considered. the characteristics have to be requested from the manufacturer. standard 1) din en 60664-1 ^ = vde 0110-1 ^ = iec 60664-1 technical data c 0 16-1 e c om at e m 0, 0 5, 0 10, 0 15, 0 20, 0 25, 0 30, 0 0 2 0 4 0 6 0 8 0 100 12 0 u m ge bungs te mp er at ur [ c] st ro ms t? r ke [a ] c 0 16-1 e c om at e m 0, 0 5, 0 10,0 15,0 20,0 25,0 30,0 0 2 0 4 0 6 0 8 0 1 00 12 0 u m ge bungs te mp er at ur [ c] st ro ms t? rk e [a ] no. of contacts 3 + pe no. of contacts 6 + pe all contacts under load a) wire gauge 1,5 mm 2 , stamped crimp contacts b) wire gauge 0,75 mm 2 , stamped solder contacts current carrying capacity current carrying capacity derating curves 20 20 40 40 60 60 80 80 100 100 120 120 0 0 5,0 5,0 10,0 10,0 15,0 15,0 20,0 20,0 25,0 25,0 30,0 30,0 all contacts under load a) wire gauge 2,5 mm2 b) wire gauge 1,5 mm2 ambient temperature ambient temperature view on male mating side a) b) a) b)
6 amphenol male cable connector straight version strain relief with clamping ring: 6 - 12,5 mm version with internal strain relief and clamping ring: 6 - 10 mm part number strain relief with clamping ring contact plating silver plated gold plated c016 20h003 100 10 c016 20h003 100 12 c016 30h006 100 10 c016 30h006 100 12 c016 10h006 000 10 c016 10h006 000 12 c016 20h003 200 10 c016 20h003 200 12 c016 30h006 200 10 c016 30h006 200 12 c016 10h006 000 10 c016 10h006 000 12 part number internal strain relief + clamping ring contact plating silver plated gold plated c016 20h003 110 10 c016 20h003 110 12 c016 30h006 110 10 c016 30h006 110 12 c016 10h006 010 10 c016 10h006 010 12 c016 20h003 210 10 c016 20h003 210 12 c016 30h006 210 10 c016 30h006 210 12 c016 10h006 010 10 c016 10h006 010 12 no. of contacts back shell color termination technique male cable connector right angled, strain relief with clamping ring cable diameter 6 - 12,5 mm part number strain relief with clamping ring contact plating silver plated gold plated c016 20k003 100 10 c016 20k003 100 12 c016 30k006 100 10 c016 30k006 100 12 c016 10k006 000 10 c016 10k006 000 12 c016 20k003 200 10 c016 20k003 200 12 c016 30k006 200 10 c016 30k006 200 12 c016 10k006 000 10 c016 10k006 000 12 no. of contacts back shell color termination technique female receptacle, screw termination (3+pe), solder termination or crimp version (6+pe) no. of contacts back shell color termination technique part number contact plating silver plated gold plated c016 20g003 100 12 c016 30g006 100 12 c016 10g006 000 12 c016 20g003 200 12 c016 30g006 200 12 c016 10g006 000 12 1) crimp contacts see page 10 / crimp tooling see catalogue tools. 2) mounting hole ? 22 without chamfer, suitable sealing for screws is necessary. tightening torque 0,8nm. mounting cut-out 2) for sealing reason this surface needs to be level and free of burrs. male cable connectors / female receptacles dimension a screw version: 13,5 mm solder version: 12,5 mm crimp version: 16,5 mm 3 + pe 3 + pe 6 + pe 6 + pe 6 + pe 6 + pe 3 + pe 3 + pe 6 + pe 6 + pe 6 + pe 6 + pe screw screw solder solder crimp 1) crimp 1) blue black blue black blue black blue black blue black blue black screw screw solder solder crimp 1) crimp 1) 3 + pe 6 + pe 6 + pe screw solder crimp 1) black black black
amphenol 7 bild male receptacle, screw termination (3+pe), solder termination or crimp version (6+pe) no. of contacts back shell color 3 + pe 6 + pe 6 + pe termination technique screw solder crimp 1) black black black bild part number strain relief with clamping ring contact plating silver plated gold plated c016 20d003 100 10 c016 20d003 100 12 c016 30d006 100 10 c016 30d006 100 12 c016 10d006 000 10 c016 10d006 000 12 c016 20d003 200 10 c016 20d003 200 12 c016 30d006 200 10 c016 30d006 200 12 c016 10d006 000 10 c016 10d006 000 12 part number internal strain relief + clamping ring contact plating silver plated gold plated c016 20d003 110 10 c016 20d003 110 12 c016 30d006 110 10 c016 30d006 110 12 c016 10d006 010 10 c016 10d006 010 12 c016 20d003 210 10 c016 20d003 210 12 c016 30d006 210 10 c016 30d006 210 12 c016 10d006 010 10 c016 10d006 010 12 no. of contacts back shell color 3 + pe 3 + pe 6 + pe 6 + pe 6 + pe 6 + pe termination technique screw screw solder solder crimp 1) crimp 1 ) blue black blue black blue black part number strain relief with clamping ring contact plating silver plated gold plated c016 20f003 100 10 c016 20f003 100 12 c016 30f006 100 10 c016 30f006 100 12 c016 10f006 000 10 c016 10f006 000 12 c016 20f003 200 10 c016 20f003 200 12 c016 30f006 200 10 c016 30f006 200 12 c016 10f006 000 10 c016 10f006 000 12 no. of contacts back shell color 3 + pe 3 + pe 6 + pe 6 + pe 6 + pe 6 + pe termination technique screw screw solder solder crimp 1) crimp 1) blue black blue black blue black part number contact plating silver plated gold plated c016 20c003 100 12 c016 30c006 100 12 c016 10c006 000 12 c016 20c003 200 12 c016 30c006 200 12 c016 10c006 000 12 1) crimp contacts see page 10 / crimp tooling see catalogue tools. 2 ) mounting hole ? 22 without chamfer, suitable sealing for screws is necessary. tightening torque 0,8 nm. female cable connector right angled, strain relief with clamping ring cable diameter 6 - 12,5 mm mounting cut-out 2) for sealing reason this surface needs to be level and free of burrs. female cable connectors / male receptacles dimension a screw version: 14,0 mm solder version: 12,0 mm crimp version: 16,5 mm female cable connector straight version strain relief with clamping ring: 6 - 12,5 mm version with internal strain relief and clamping ring: 6 - 10 mm
8 amphenol c 0 16-1 e c om at e m 0, 0 5, 0 10, 0 15, 0 20, 0 25, 0 30, 0 0 2 0 4 0 6 0 8 0 1 00 12 0 u m ge b ungs te mp er at ur [ c] st ro ms t? r ke [a ] a) 3 + pe 6 + pe 600 v 3 (mated) iii ii 6000 v 14 a / + 40 c 10 8 5 m 40 / 125 / 56 ip 65 pa 6.6 / pa 6 pa 6.6 / pa 6 0,14 - 1,5 mm 2 awg 26 - 16 neopren vo ul 94 35 n din en 60664-1 1) din en 60664-1 1) din en 60664-1 1) din en 60664-1 1) din en 60664-1 1) din en 60512-5-2, test 5b din en 60512-3-1, test 3a din en 60512, test 2a din en 60068-1 din en 60529 din en 60512-13-2, test 13b din en 60512, test 9a -40c ... +125c characteristics general characteristics number of contacts crimp type 500 mating cycles silver plated / gold plated crimp round thread electrical characteristics rated voltage pollution degree installation (overvoltage) category material group rated impulse withstand voltage current carrying capacity insulation resistance contact resistance climatic characteristics climatic category operating temperature mechanical characteristics degree of protection insertion and withdrawal force mechanical operation materials housing material dielectric material gasket material contact plating other characteristics termination technique wire gauge / awg flammability locking system the stated technical values refer to the use as connector without breaking capacity (coc) . if these components are used as plug and socket device a reduced current carrying capacity has to be considered. the characteristics have to be requested from the manufacturer. standard 1) din en 60664-1 ^ = vde 0110-1 ^ = iec 60664-1 technical data view on male mating side derating curves testhouse characteristics 3+pe, 600 v, 13 a bei awg 16 3+pe, 600 v, 5 a bei awg 26 6+pe, 600 v, 13 a bei awg 16 6+pe, 600 v, 5 a bei awg 26 ul 1) no. of contacts 6 + pe current carrying capacity 20 40 60 80 100 120 0 5,0 10,0 15,0 20,0 25,0 30,0 all contacts under load a) wire gauge 1,5 mm 2 , stamped crimp contacts ambient temperature in general approvals refer to versions of the connector series. test report upon request. 1) please refer to ?conditions of acceptability high voltage
amphenol 9 male receptacle, crimp version no. of contacts back shell color 3 + pe 6 + pe termination technique crimp crimp 1) black black female cable connector straight, with clamping ring, cable diameter 6 - 12,5 mm part number strain relief with clamping ring c016 10d003 806 12 c016 10d006 806 12 no. of contacts back shell color 3 + pe 6 + pe termination technique crimp crimp 1) black black part number c016 10p003 806 12 c016 10p006 806 12 1) crimp contacts see page 10 / crimp tooling see catalogue tools. 2) tightening torque 4 -5 nm. mounting cut-out for sealing reason this surface needs to be level and free of burrs. female cable connectors / male receptacles high voltage * standard dust cups dont f t on high voltage versions special caps upon request * thread size m20 x 1,5 2) * if turn protection is required, we recommend to glue receptacles
10 amphenol stamped single contacts stamped contacts on reel for hand crimping tools 200 pcs. crimp contacts, pin for standard versions contact ? insulation ? no. of wire supplied pieces part number in mm in mm contacts gauge as contact plating silver plated gold plated 1,6 1,0 - 2,0 6 + pe 0,14 - 0,5 mm 2 single contact 100 vn 01 016 0011 (1) vn 01 016 0011 (2) contact on reel 200 zn 01 016 0011 (1) zn 01 016 0011 (2) right 2000 hn 01 016 0011 (1) hn 01 016 0011 (2) left 2000 tn 01 016 0011 (1) tn 01 016 0011 (2) 1,6 1,8 - 2,8 6 + pe 0,5 - 1,5 mm 2 single contact 100 vn 01 016 0004 (1) vn 01 016 0004 (2) contact on reel 200 zn 01 016 0004 (1) zn 01 016 0004 (2) right 2000 hn 01 016 0004 (1) hn 01 016 0004 (2) left 2000 tn 01 016 0004 (1) tn 01 016 0004 (2) crimp contacts, socket for standard and high voltage version 1,6 1,0 - 2,0 6 + pe 0,14 - 0,5 mm 2 single contact 100 vn 01 016 0003 (1) vn 01 016 0003 (2) contact on reel 200 zn 01 016 0003 (1) zn 01 016 0003 (2) right 2000 hn 01 016 0003 (1) hn 01 016 0003 (2) left 2000 tn 01 016 0003 (1) tn 01 016 0003 (2) 1,6 1,8 - 2,8 6 + pe 0,5 - 1,5 mm 2 single contact 100 vn 01 016 0002 (1) vn 01 016 0002 (2) contact on reel 200 zn 01 016 0002 (1) zn 01 016 0002 (2) right 2000 hn 01 016 0002 (1) hn 01 016 0002 (2) left 2000 tn 01 016 0002 (1) tn 01 016 0002 (2) 1,6 1,0 - 2,0 6 + pe 0,14 - 0,5 mm 2 single contact 100 vn 02 016 0003 (1) vn 02 016 0003 (2) contact on reel 200 zn 02 016 0003 (1) zn 02 016 0003 (2) right 2000 hn 02 016 0003 (1) hn 02 016 0003 (2) left 2000 tn 02 016 0003 (1) tn 02 016 0003 (2) 1,6 1,8 - 2,8 6 + pe 0,5 - 1,5 mm 2 single contact 100 vn 02 016 0002 (1) vn 02 016 0002 (2) contact on reel 200 zn 02 016 0002 (1) zn 02 016 0002 (2) right 2000 hn 02 016 0002 (1) hn 02 016 0002 (2) left 2000 tn 02 016 0002 (1) tn 02 016 0002 (2) stamped contacts on reel for crimping machines 2000 pcs. feeds to the right 2000 pcs. feeds to the left crimp contacts contact ? insulation ? no. of wire supplied pieces part number in mm in mm contacts gauge as contact plating silver plated gold plated contact ? insulation ? no. of wire supplied pieces part number in mm in mm contacts gauge as contact plating silver plated gold plated find our tools in the catalogue tools. crimp contacts, pin for high voltage versions
amphenol 11 mounting of the protective covers on the back shell, male or female receptacles description figure protecitve cover for male cable connector and male receptacle part number figure part number protective cover for female cable connector and female receptacle for male cable connector c016 00u000 010 12 for female cable connector c016 00v000 010 12 for male receptacle c016 00u000 000 12 for female receptacle c016 00v000 000 12 appr ox . ? 29,0 25,5 135 25,5 ? 29,0 60,0 60,0 ? 29,0 31,3 appr ox . 135 ? 29,0 31,3 1) x is synonymous for packaging unit 10 pcs. accessories back shell, right angled with clamping ring packaging unit 10 pcs. cable clamp for all straight cable connectors, packaging units 10 pcs. cable clamp diameter ? 6 - 10 mm n 16 110 2000 x 1) back shell color: blue: c016 g09 042 g10 x 1) black: c016 g09 041 g10 x 1) description figure part number protective caps for 600v version upon request
12 amphenol mounting instruction, straight cable connector additionally included gasket cable nut tightening torque 1,5 - 2 nm tightening torque max. 0,3 nm mounting instruction, right angled cable connector mounting instructions b a b a stripping lengths screw contacts with internal cable retention without internal cable retention solder contacts with internal cable retention without internal cable retention crimp contacts 0,14 C 0,50 mm 2 0,50 C 1,5 mm 2 with internal cable retention without internal cable retention 1) pe + 2mm 2) end splice recommended measure b 7 +1 2) 7 +1 2) 4 +1 4 +1 3 +0,5 3,5 +1 measure a 1) 18 +1 25 +1 14 +1 22 +1 14 +1 22 +1 measure a 1) 35 +1 32 +1 32 +1 measure b 7 +1 2) 4 +1 3 +0,5 3,5 +1 stripping lengths screw contacts without internal cable retention solder contacts without internal cable retention crimp contacts 0,14 C 0,5 mm 2 0,50 C 1,5 mm 2 without internal cable retention 1) pe + 2mm 2) end splice recommended clamping ring with mounted gasket back shell tightening torque 1,5 - 2 nm internal strain relief male contact insert with locking ring female contact insert with locking ring additionally included gasket right angled back shell tightening torque 1 - 2 nm cable nut tightening torque 1,5 - 2 nm clamping ring with male contact insert with locking ring female contact insert with locking ring mounted gasket shell tr 22 x 2 tr 22 x 2
amphenol 13 screw termination screw clamps are designed acc. to en 60999-1/vde 06095.1. chart 1 below shows the screw size depending on wire size and the required clamping and testing torque. chart 1 diagram 1 below shows the range of tensile strength for a screw connection with a clamp screw m3, fastened with a torque of 50 ncm, depending on the wire size. diagram 1 wire size (mm 2 ) 1,5 2,5 screw size m 3 m 3 test torque (ncm) max. 50 max. 50 tensile strength wire gauge chart 2 it is to be noted that wires of the same awg number but with different composition have slightly different mm 2 . technical information color coding backshells of cable connectors are available in different colors upon request. min order quantity = 1000 pcs. per type. mechanical coding achieved by special coding pins which are inserted into contact cavities. min. order quantitiy = 1000 pcs. per type. crimp version order number do not include crimp contacts. please order separately (see page 10). crimp tooling ask for our catalogue tools order information 10 00 006 d 30 c016 aufbau der bestellnummer serie 1 style h = male cable connector d = female cable connector k = right angled male cable connector f = right angled female cable connector c = male receptacle g = female receptacle termination technique 10 = crimp (6 + pe) 20 = screw (3 + pe) 30 = solder (6 + pe) number of poles 003 = 3 + pe 006 = 6 + pe strain relief 00 = receptacle or cable connector with clamping ring 10 = cable connector with internal cable clamp contact plating 1 = silver plated 2 = gold plated 0 = without contacts version 10 = cable connector in blue/black 12 = cable connector or receptacle in black 15 = emi (metallized) the example shows a female cable connector 6 + pe. this comparison chart allows a cross reference between american wire gauge (awg) and metric wire sizes (mm 2 ). 30 1 x 0,25 0,25 mm 0,05 mm 2 7 x 0,10 0,36 mm 0,06 mm 2 28 1 x 0,32 0,32 mm 0,08 mm 2 7 x 0,13 0,38 mm 0,09 mm 2 26 1 x 0,40 0,40 mm 0,13 mm 2 7 x 0,16 0,48 mm 0,14 mm 2 19 x 0,10 0,51 mm 0,15 mm 2 24 1 x 0,51 0,51 mm 0,21 mm 2 7 x 0,20 0,61 mm 0,23 mm 2 19 x 0,13 0,64 mm 0,24 mm 2 22 1 x 0,64 0,64 mm 0,33 mm 2 7 x 0,25 0,76 mm 0,36 mm 2 19 x 0,16 0,81 mm 0,38 mm 2 20 1 x 0,81 0,81 mm 0,52 mm 2 7 x 0,32 0,97 mm 0,56 mm 2 19 x 0,20 1,02 mm 0,62 mm 2 18 1 x 1,02 1,02 mm 0,79 mm 2 19 x 0,25 1,27 mm 0,96 mm 2 16 19 x 0,29 1,44 mm 1,23 mm 2 14 19 x 0,36 1,80 mm 1,95 mm 2 12 19 x 0,46 2,29 mm 3,09 mm 2 10 37 x 0,40 3,10 mm 4,60 mm 2 8 133 x 0,29 4,0 mm 8,80 mm 2 6 133 x 0,36 5,5 mm 13,5 mm 2 awg wire composition wire diameter wire size
14 amphenol min. tensile strength n wire gauge in mm 2 / awg crimp termination a crimp connection is a non-detachable electrical connection between a wire and a crimp contact produced with the crimp technology. precise crimping dies which are matched to the crimp barrel and the wire size and a defined deformation result in a reliable electrical connection. there are open crimp barrels (stamped contacts) and closed crimp barrels (turned contacts). the main advantages of crimp connections are: ? efficient termination of contacts ? reproducible terminations achieve consistent electrical and mechanical results the requirements for crimp connections are defined in iec 60352 part 2 / din en 60352 part 2. an important point of the quality of a crimp connection is the achieved tensile strength of the termination. easily measured, the tensile strength is a practible means for quality control purposes. diagram 2 below shows the required minimum tensile strength for open and closed barrels depending on the wire size. diagram 2 assembly instructions for crimp contacts use the released crimp tool. the insertion and extraction of crimp contacts shall only be approved with the corresponding insertion/extraction tool. a detailed description of the crimp technology can be found in our crimp tooling catalogues. crimp contacts are in this catalogue on page 10. 1000 500 400 300 200 100 50 40 30 20 10 5 0,05 0, 1 0,2 0,5 1, 01 ,5 2,5 4,0 6,0 10 ,0 n 4000 3000 2000 1000 500 400 300 200 100 50 40 30 20 lb 28 26 24 22 20 18 16 14 12 10 8 aw g mm 2 min. tensile strength lb technical information
amphenol 15 degree of protection electrical devices to which connectors belong to have to be protected for safety reasons from outside influences like dust, foreign objects, direct contact, moisture and water. this protection is provided on industrial connectors by its housings with their latching devices and sealed cable entries. the degree of protection can be selected depending on the type of intended use. the standard iec 60529 and/or din en 60529/vde 04 70 part 1 has specified the degree of protection and divided into several classes. the degree of protection is indicated in the following way: ip65 code letters (internat. protection) 1st charact. numeral (degree of protection against access to hazardous parts and against solid foreign objects) 2nd charact. numeral (degree of protection against ingress of water) the following charts 4 an 5 give an overview about all protection degrees. chart 4 1st charact. brief description definition numeral 0 1 2 3 4 5 6 non-protected protected against access to hazardous parts with the back of a hand. protected against solid foreign objects of 50mm ?. protected against access to hazardous parts with a finger. protected against solid foreign objects of 12,5mm ?. protected against access to hazardous parts with a tool. protected against solid foreign objects of 2,5mm ?. protected against access to hazardous parts with a wire. protected against solid foreign objects of 1mm ?. protected against access to hazardous parts with a wire. dust-protected. protected against access to hazardous parts with a wire dust-tight. C the probe, sphere of 50mm ?, shall not fully penetrate and shall have adequate clearance from hazardous parts. the jointed test finger of 12mm ?, 80mm length, shall have adequate clearance from hazardous parts. the probe, sphere of 12,5mm ?, shall not fully penetrate. the probe of 2,5mm ? shall not penetrate at all. the probe of 1mm ? shall not penetrate at all. the probe of 1mm ? shall not penetrate. intrusion of dust is not totally prevented, but dust shall not penetrate in a quantity to interfere with satisfactory operation of the device or to impair safety. the probe of 1mm ? shall not penetrate. no intrussion of dust. chart 5 1) remark: numeral acc. to din 40050 part 9, vehicles ip code. 2nd charact. brief description definition numeral 0 1 2 3 4 5 6 7 8 9k 1) non-protected protected against vertically falling water drops protected against vertically falling water drops when enclosure tilted up to 15 protected against spraying water protected against splashing water protected against water jets protected against powerful water jets protected against the effects of temporary immersion in water protected against the effects of continous immersion in water protected against water during high pressure/steam jet cleaning C vertically falling drops shall have no harmful effects. vertically falling drops shall have no harmful effects when the enclosure is tilted at any angel up to 15 on either side of the vertical. water sprayed at an angle up to 60 on either side of the vertical shall have no harmful effects. water splashed against the enclosure from any direction shall have no harmful effects. water projected in jets against the enclosure from any direction shall have no harmful effects. water projected in powerful jets against the enclosure from any direction shall have no harmful effects. intrusion of water in quantities causing harmful effects shall not be possible when the enclosure is temporalily immersed in water for 30 min. in 1m depth. intrusion of water in quantities causing harmful effects shall not be possible when the enclosure is continuously immersed in water under conditions which shall be agreed between manufacturer and user but which are more severe than for numeral 7. water projected in powerful jets with high pressure against the enclosure from any direction shall have no harmful effects. technical information
16 amphenol 1. general remarks these connectors are designed and produced in conformity with the low voltage directive (73/23/ewg) respectively ger?tesicherheit sgesetz (german law) and are especially in accordance with the standards din en 61984 / iec 61984 (vde0627); iec 60664-1 (vde 0110-1) and iec 60529. the connectors may be used only within the technical ratings. all technical data refer to mated connectors under live conditions. the safety of the connector system depends on the correct selection of products, proper assembly of the connector device and a precise fit of the connectors. 2. application remarks connectors with / without breaking capacity must be used according to specified technical ratings. the technical data represents the initial value of mated parts under predetermined conditions and length of time.these values could change with different test parameters or product requirements. the connectors of the series are designed for the areas of application including the construction and installation of controlling and electrical devices. the product has been tested for the intended purposes only. if the connection is used other than originally intended, or in another manner that we have not previously tested, the consumer assumes full responsibility. all rated data for the connectors listed in this catalogue are based on over- voltage category iii 1) and pollution degree 3 2) for electronic applications if not stated differently. connectors were completely mated according to their respective safety locking mechanism. selection and testing of connectors with / without breaking capacity to meet specific product or industrial requirements such as rated voltage and the related clearances and creepage distances are the responsibility of the user. 3. assembling remarks protection against electrical shock of the termination of the connectors shall be secured by correct mounting. connectors of the same or different series being mounted side by side may be protected against incorrect mating by the use of coding options. care must be taken to ensure the parts are correctly mated and screws are tightened with the proper torque. 4. termination remarks cable connectors are effectively secured when using the strain relief (internal strain relief clamp or clamping ring). when the connector contains a simple gland bushing for retention without clamping ring the cable should have a strain relief close behind the connector. all cable properties or specifcations must be compatible with the connector design and materials. designated wire conductors must be terminated to the correct poles in the connector. crimp contacts must be fully inserted into the plastic housing and strain relief assured with a slight tug on the wire. wire should be stripped correctly according to printed specifcations to insure no electrical contact can be made between the conductors. there should be no nicked or cut strains during the stripping action. remarks / safety classification
amphenol 17 part no. page part no. page part no. page part no. page summary of part numbers c016 00u000 000 12 1 1 c016 00u000 010 12 1 1 c016 00v000 000 12 1 1 c016 00v000 010 12 1 1 c016 10c006 000 12 7 c016 10d003 806 12 9 c016 10d006 000 10 7 c016 10d006 000 12 7 c016 10d006 010 10 7 c016 10d006 010 12 7 c016 10d006 806 12 9 c016 10f006 000 10 7 c016 10f006 000 12 7 c016 10g006 000 12 6 c016 10h006 000 10 6 c016 10h006 000 12 6 c016 10h006 010 10 6 c016 10h006 010 12 6 c016 10k006 000 10 6 c016 10k006 000 12 6 c016 10p003 806 12 9 c016 10p006 806 12 9 c016 20c003 100 12 7 c016 20c003 200 12 7 c016 20d003 100 10 7 c016 20d003 100 12 7 c016 20d003 110 10 7 c016 20d003 110 12 7 c016 20d003 200 10 7 c016 20d003 200 12 7 c016 20d003 210 10 7 c016 20d003 210 12 7 c016 20f003 100 10 7 c016 20f003 100 12 7 c016 20f003 200 10 7 c016 20f003 200 12 7 c016 20g003 100 12 6 c016 20g003 200 12 6 c016 20h003 100 10 6 c016 20h003 100 12 6 c016 20h003 110 10 6 c016 20h003 110 12 6 c016 20h003 200 10 6 c016 20h003 200 12 6 c016 20h003 210 10 6 c016 20h003 210 12 6 c016 20k003 100 10 6 c016 20k003 100 12 6 c016 20k003 200 10 6 c016 20k003 200 12 6 c016 30c006 100 12 7 c016 30c006 200 12 7 c016 30d006 100 10 7 c016 30d006 100 12 7 c016 30d006 110 10 7 c016 30d006 110 12 7 c016 30d006 200 10 7 c016 30d006 200 12 7 c016 30d006 210 10 7 c016 30d006 210 12 7 c016 30f006 100 10 7 c016 30f006 100 12 7 c016 30f006 200 10 7 c016 30f006 200 12 7 c016 30g006 100 12 6 c016 30g006 200 12 6 c016 30h006 100 10 6 c016 30h006 100 12 6 c016 30h006 110 10 6 c016 30h006 110 12 6 c016 30h006 200 10 6 c016 30h006 200 12 6 c016 30h006 210 10 6 c016 30h006 210 12 6 c016 30k006 100 10 6 c016 30k006 100 12 6 c016 30k006 200 10 6 c016 30k006 200 12 6 c016 g09 041 g10 x 1 1 c016 g09 042 g10 x 1 1 hhn 01 016 0002 (1) 1 0 hn 01 016 0002 (2) 1 0 hn 01 016 0003 (1) 1 0 hn 01 016 0003 (2) 1 0 hn 01 016 0004 (1) 1 0 hn 01 016 0004 (2) 1 0 hn 01 016 0011 (1) 1 0 hn 01 016 0011 (2) 1 0 hn 02 016 0002 (1) 1 0 hn 02 016 0002 (2) 1 0 hn 02 016 0003 (1) 1 0 hn 02 016 0003 (2) 1 0 n 16 110 2000 x 1 1 tn 01 016 0002 (1) 1 0 tn 01 016 0002 (2) 1 0 tn 01 016 0003 (1) 1 0 tn 01 016 0003 (2) 1 0 tn 01 016 0004 (1) 1 0 tn 01 016 0004 (2) 1 0 tn 01 016 0011 (1) 1 0 tn 01 016 0011 (2) 1 0 tn 02 016 0002 (1) 1 0 tn 02 016 0002 (2) 1 0 tn 02 016 0003 (1) 1 0 tn 02 016 0003 (2) 1 0 vn 01 016 0002 (1) 1 0 vn 01 016 0002 (2) 1 0 vn 01 016 0003 (1) 1 0 vn 01 016 0003 (2) 1 0 vn 01 016 0004 (1) 1 0 vn 01 016 0004 (2) 1 0 vn 01 016 0011 (1) 1 0 vn 01 016 0011 (2) 1 0 vn 02 016 0002 (1) 1 0 vn 02 016 0002 (2) 1 0 vn 02 016 0003 (1) 1 0 vn 02 016 0003 (2) 1 0 zn 01 016 0002 (1) 1 0 zn 01 016 0002 (2) 1 0 zn 01 016 0003 (1) 1 0 zn 01 016 0003 (2) 1 0 zn 01 016 0004 (1) 1 0 zn 01 016 0004 (2) 1 0 zn 01 016 0011 (1) 1 0 zn 01 016 0011 (2) 1 0 zn 02 016 0002 (1) 1 0 zn 02 016 0002 (2) 1 0 zn 02 016 0003 (1) 1 0 zn 02 016 0003 (2) 1 0
18 amphenol for notes
amphenol 19 for notes
international argentina amphenol argentina av. callao 930 2nd floor offce b plaza c 1023 aap buenos aires phone +54 / 11 / 48 15 68 86 www.amphenol.com.ar australia amphenol australia pty. ltd. 2 fiveways blvd keysborough victoria 31 73 phone +61 / 3 / 8796 / 8888 www.amphenol.com.au brazil amphenol do brasil ltda. rua diogo moreira 132, 20th floor cep 05423-101 sao paulo sp phone +55 / 11 / 3815.1003 www.amphenol.com.br china amphenol-tuchel electronics gmbh china branch 20 tianshan road changzhou 213022 phone +86 / 0519 / 5110301 www.amphenol.de france amphenol socapex s.a.s. 948, promenade de larve, bp 29 thyez cedex, 74311 phone +33 / 4 5089 2800 www.amphenol-socapex.com germany amphenol-tuchel electronics gmbh august-haeusser-str. 10 74080 heilbronn phone +49 / 7131 / 929-0 www.amphenol.de united kingdom amphenol limited thanet way,whitstable kent, ct53jf phone +44 / 1227 773 200 www.amphenol.co.uk spain amphenol espana edifcio burgosol, ofcina 55 c/comunidad de madrid, 35 bis las rozas (madrid), 28230 phone +34 / 91 64 07302 www.amphenol.com sweden amphenol-tuchel electronics ?vre ?sv?gen 11 439 37 onsala phone +46 / 300 264 60 www.amphenol.info taiwan amphenol east asia limited-taiwan 5f, no 361, fusing 1st rd gueishan township, taoyuan county 333 phone +886 / 3 2647 200 www.amphenol.com turkey amphenol turkiye ayazaga mah. meydan sk. no. 28 beybi giz plaza, kat. 26 34396 maslak/istanbul phone +90 / 0212 / 3352501 www.amphenol.com.tr usa amphenol-tuchel electronics 6900 haggerty road suite 200 canton, michigan 48187 phone +1 / 734 / 4516400 www.amphenol.info amphenol corporation corporate headquarters 358 hall avenue wallingford, ct 06492 phone +1 / 877 / 267 4366 phone +1 / 2 03 / 2 65 / 89 00 www.amphenol.com india amphenol omniconnect india pvt. ltd. plot no. 3/4b&5a, cmda s industrial area, maraimalai naga, tamil nadu - 603209 phone +91 / 44 / 37480293 www.amphenol-in.com italy amphenol-tuchel italy via barbaiana n. 5 20020 lainate (mi) phone +39 / 02 / 932 541 www.amphenol.info korea amphenol daeshin elect and precision co.,ltd 558 songnae-dong, sosa-gu bucheon-city, kyunggi-do korea 422-130 phone +82 / 2 / 785 / 1588 www.amphenol.co.kr mexico amphenol mexico prolongacion reforma 61 - 6 b2 col. paseo de las lomas c.p. 01330 mexico d.f. phone +52 / 55 / 5258.9984 www.amphenolmexico.com singapore asia pacifc sales operations 72 bendemeer rd, no.03-32/33 hiap huat house, luzerne, 339941 singapore phone +65 / 6294 / 2128 www.amphenol.com south africa amphenol international ltd chislehurston 30 impala road 2196 chislehurston sandton, 2146 phone +27 / 11 / 7839517 www.amphenol.co.za ate 2200 c 0808 3.000 printed on chlorin-free bleached paper, specifications may be changed without notice. copyright 08/08 by amphenol-tuchel electronics gmbh, germany amphenol amphenol-tuchel electronics gmbh august-haeusser- str. 10 . d-74080 heilbronn . germany . phone +49 (0) 71 31/ 9 29-0 . fax +49 (0) 71 31/ 9 29- 486 www.amphenol.info your engineering sales representative:

▲Up To Search▲

Price & Availability of C016-00U000-020-1

	To Download C016-00U000-020-1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .